Terminology

portion of road reservation intended to accommodate a single line of moving material entities along its length
EXAMPLE: Traffic lane, cycle lane, sidewalk.
NOTE 1 to entry: Lanes are often bounded by lane markings.
NOTE 2 to entry: Lanes may be significantly wider than the normal vehicle width to allow variance in lane position of the vehicle as well as for various vehicle dimensions…

portion of road reservation intended to accommodate a single line of moving material entities along its length
EXAMPLE: Traffic lane, cycle lane, sidewalk.
NOTE 1 to entry: Lanes are often bounded by lane markings.
NOTE 2 to entry: Lanes may be significantly wider than the normal vehicle width to allow variance in lane position of the vehicle as well as for various vehicle dimensions.
NOTE 3 to entry: The “lane” nomenclature typically refers to motor vehicle usage, but can also refer to other purposes, such as sidewalks.

Application Area: ITS Architecture
Terminology

portion of carriageway designed to accommodate a single line of moving road vehicles
NOTE 1 to entry: The term “lane” is often used to refer to a “traffic lane” when the context is known to be “traffic”.
NOTE 2 to entry: A traffic lane can be bi-directional, such as a single lane road, a two-way turn/overtaking lane, or a reversible flow lane.
NOTE 3 to entry: Some jurisdictions allow…

portion of carriageway designed to accommodate a single line of moving road vehicles
NOTE 1 to entry: The term “lane” is often used to refer to a “traffic lane” when the context is known to be “traffic”.
NOTE 2 to entry: A traffic lane can be bi-directional, such as a single lane road, a two-way turn/overtaking lane, or a reversible flow lane.
NOTE 3 to entry: Some jurisdictions allow supplemental uses of a traffic lane, such as multiple motorcycles sharing the width of a traffic lane or allowing a bicycle to use the edge of a lane.

Associated Standards: ISO 17361, ISO 11270
Terminology

short length of paved carriageway at its edge designed to allow a vehicle to draw out of the traffic lanes and stop temporarily
NOTE 1 to entry: Lay-bys are not part of a hard shoulder.
NOTE 2 to entry: Lay-bys can be used for emergency situations, picking up/dropping off passengers, etc.

short length of paved carriageway at its edge designed to allow a vehicle to draw out of the traffic lanes and stop temporarily
NOTE 1 to entry: Lay-bys are not part of a hard shoulder.
NOTE 2 to entry: Lay-bys can be used for emergency situations, picking up/dropping off passengers, etc.

Application Area: ITS Architecture
Terminology

set of valid literals for a data type

set of valid literals for a data type

Application Area: ITS Architecture
Terminology

element, group, attribute, attribute group, or data types that are not global

element, group, attribute, attribute group, or data types that are not global

Application Area: ITS Architecture
Terminology

particular place or position
NOTE 1 to entry: The term “location” by itself is a broad term that can be used to reference spatial, computer memory, imaginary and other locations.

particular place or position
NOTE 1 to entry: The term “location” by itself is a broad term that can be used to reference spatial, computer memory, imaginary and other locations.

Associated Standards: CEN TS 16157-4, CEN TS 16157-2
Terminology

speed of a vehicle that exceeds pedestrian speeds and is more typical of pedal cycles
EXAMPLE: SAE J3194 associates this with a top speed in the range between 13 km/h and 32 km/h.
NOTE 1 to entry: Local regulations for the exact speed range vary.

speed of a vehicle that exceeds pedestrian speeds and is more typical of pedal cycles
EXAMPLE: SAE J3194 associates this with a top speed in the range between 13 km/h and 32 km/h.
NOTE 1 to entry: Local regulations for the exact speed range vary.

Application Area: ITS Architecture
Strukturální kategorie: Data and Processes > Quantities
Terminology

vehicle with a design speed7.2.2) in the range of low vehicle speeds7.5.8)
EXAMPLE: Mountain bicycle.
NOTE 1 to entry: The term “cycle-speed vehicle” is allowed but the preferred term follows a logical progression of levels.

vehicle with a design speed7.2.2) in the range of low vehicle speeds7.5.8)
EXAMPLE: Mountain bicycle.
NOTE 1 to entry: The term “cycle-speed vehicle” is allowed but the preferred term follows a logical progression of levels.

Application Area: ITS Architecture
Terminology

string consisting of one or more words, where each word within the string, except for the first, starts with an upper-case letter and all other letters are lowercase; the words follow each other without any
space; hyphens and numbers may be used, but the first character of the string must be a lower case alphabetic character; a hyphen may not be the last character or occur multiple times in…

string consisting of one or more words, where each word within the string, except for the first, starts with an upper-case letter and all other letters are lowercase; the words follow each other without any
space; hyphens and numbers may be used, but the first character of the string must be a lower case alphabetic character; a hyphen may not be the last character or occur multiple times in sequence

Application Area: ITS Architecture
Terminology

centre system that allows an entity to monitor and manage the construction and maintenance of road infrastructure

centre system that allows an entity to monitor and manage the construction and maintenance of road infrastructure

Application Area: ITS Architecture
Terminology

identification of element types and structure within a document
NOTE 1 to entry: The mark-up is not actually part of the content, but identifies the components and their roles.

identification of element types and structure within a document
NOTE 1 to entry: The mark-up is not actually part of the content, but identifies the components and their roles.

Application Area: ITS Architecture
Terminology

entity that occupies three-dimensional space
NOTE 1 to entry: All material entities have certain characteristics that can be described and therefore this concept is important for ontology purposes.

entity that occupies three-dimensional space
NOTE 1 to entry: All material entities have certain characteristics that can be described and therefore this concept is important for ontology purposes.

Application Area: ITS Architecture
Terminology

characteristic of a financial model that requires users to enter into an agreement prior to receiving services
NOTE 1 to entry: The agreement can be associated with fees.
NOTE 2 to entry: The agreement can be minimal, such as collecting user information for business purposes.
NOTE 3 to entry: The membership can be granted as a part of a broader agreement. For example, a university bus…

characteristic of a financial model that requires users to enter into an agreement prior to receiving services
NOTE 1 to entry: The agreement can be associated with fees.
NOTE 2 to entry: The agreement can be minimal, such as collecting user information for business purposes.
NOTE 3 to entry: The membership can be granted as a part of a broader agreement. For example, a university bus system can restrict access to students and faculty.

Application Area: ITS Architecture
Terminology

collection of coherent information sent through an information channel

collection of coherent information sent through an information channel

Associated Standards: ISO 15075, ISO 15784-1, ISO 14813-6
Terminology

grouping of data elements, data frames, or data elements and data frames that is used to convey information

grouping of data elements, data frames, or data elements and data frames that is used to convey information

Associated Standards: ISO 14827-1
Terminology

Message Addressing Property

Application Area: ITS Architecture
Terminology

occurrence of a message containing the actual values for the data elements and/or data frames

occurrence of a message containing the actual values for the data elements and/or data frames

Associated Standards: ISO 14827-1
Terminology

Greek prefix denoting a description that is one level of abstraction above the concept being described

Greek prefix denoting a description that is one level of abstraction above the concept being described

Application Area: ITS Architecture
Terminology

documenting characteristic of a data concept that is provided in a message
NOTE 1 to entry: Documenting characteristics are termed “meta-attributes” when stored in a DD, but are termed metadata when provided within the same message instance as the actual value. For example, a data element may
be defined within the DD with a specific unit of measure, such as meters; the Unit of Measure…

documenting characteristic of a data concept that is provided in a message
NOTE 1 to entry: Documenting characteristics are termed “meta-attributes” when stored in a DD, but are termed metadata when provided within the same message instance as the actual value. For example, a data element may
be defined within the DD with a specific unit of measure, such as meters; the Unit of Measure field is a defined meta-attribute. Alternatively, the unit of measure may be defined at runtime within a message, especially for items such as unit of currency. The field within a message that defines the unit of currency for an included value
would be termed “metadata”.

Application Area: ITS Architecture
Associated Standards: ISO 14817-1
Terminology

documenting characteristic of a data concept that is stored in a data dictionary

documenting characteristic of a data concept that is stored in a data dictionary

Application Area: ITS Architecture
Terminology

a statement of what objective results are to be provided by the standard and how it is intended to achieve the vision

a statement of what objective results are to be provided by the standard and how it is intended to achieve the vision

Application Area: ITS Architecture
Terminology

representation of an entity from which the important elements have been abstracted by removing unimportant detail while at the same time retaining the interrelationship between the key elements of the whole
NOTE 1 to entry: A model may be made more or less abstract by the successive suppression of detail such that the concepts and relationships come into enhanced focus and become more readily…

representation of an entity from which the important elements have been abstracted by removing unimportant detail while at the same time retaining the interrelationship between the key elements of the whole
NOTE 1 to entry: A model may be made more or less abstract by the successive suppression of detail such that the concepts and relationships come into enhanced focus and become more readily understood. However the process can be taken too far when the simplification has exceeded the threshold where a necessary understanding may be achieved. Thus the process of modelling is one of going only far enough to achieve the optimum understanding and insight — and no further.
NOTE 2 to entry: A model is a way of representing something, other than in its natural state.

Application Area: ITS Architecture
Associated Standards: ISO TR 24529
Terminology

method of writing specifications and developing applications, based on a platform-independent model (PIM)
NOTE: A complete MDA specification consists of a definitive platform-independent base UML model, plus one or more platform-specific models (PSM) and interface definition sets, each describing how the base model is implemented on a different middleware platform.

method of writing specifications and developing applications, based on a platform-independent model (PIM)
NOTE: A complete MDA specification consists of a definitive platform-independent base UML model, plus one or more platform-specific models (PSM) and interface definition sets, each describing how the base model is implemented on a different middleware platform.

Application Area: ITS Architecture
Associated Standards: TR 24532
Terminology

any construct of metadata used within a model to specify a particular aspect or element of this model

any construct of metadata used within a model to specify a particular aspect or element of this model

Application Area: ITS Architecture
Terminology

speed of a vehicle that exceeds moderately-low vehicle speeds7.5.9) but does not reach free-flow motorway speeds
EXAMPLE: A speed in the range of 48 km/h and 87 km/h.
NOTE 1 to entry: Local regulations for the exact speed range vary.

speed of a vehicle that exceeds moderately-low vehicle speeds7.5.9) but does not reach free-flow motorway speeds
EXAMPLE: A speed in the range of 48 km/h and 87 km/h.
NOTE 1 to entry: Local regulations for the exact speed range vary.

Application Area: ITS Architecture
Strukturální kategorie: Data and Processes > Quantities
Terminology

vehicle with a design speed7.2.2) in the range of moderate vehicle speeds7.5.10)
EXAMPLE: Typical side-by-side utility task vehicle (UTV).

vehicle with a design speed7.2.2) in the range of moderate vehicle speeds7.5.10)
EXAMPLE: Typical side-by-side utility task vehicle (UTV).

Application Area: ITS Architecture
Terminology

vehicle with a design speed7.2.2) in the range of moderately-high vehicle speeds7.5.11)
EXAMPLE: Typical passenger car.

vehicle with a design speed7.2.2) in the range of moderately-high vehicle speeds7.5.11)
EXAMPLE: Typical passenger car.

Application Area: ITS Architecture
Terminology

vehicle with a design speed7.2.2) in the range of moderately-low vehicle speeds7.5.9)
EXAMPLE: Typical moped.

vehicle with a design speed7.2.2) in the range of moderately-low vehicle speeds7.5.9)
EXAMPLE: Typical moped.

Application Area: ITS Architecture
Terminology

speed of a vehicle that is typical of free-flow motorway speeds to twice that speed
EXAMPLE: A speed in the range of 87 km/h and 198 km/h.
NOTE 1 to entry: Local regulations for the exact speed range vary.

speed of a vehicle that is typical of free-flow motorway speeds to twice that speed
EXAMPLE: A speed in the range of 87 km/h and 198 km/h.
NOTE 1 to entry: Local regulations for the exact speed range vary.

Application Area: ITS Architecture
Strukturální kategorie: Data and Processes > Quantities
Terminology

speed of a vehicle that exceeds speeds typical of pedal cycles but can be reached on performance pedal cycles in short bursts or by performance riders
EXAMPLE: SAE J3194 associates this with a top speed in the range of 32 km/h to 48 km/h.
NOTE 1 to entry: Local regulations for the exact speed range vary.

speed of a vehicle that exceeds speeds typical of pedal cycles but can be reached on performance pedal cycles in short bursts or by performance riders
EXAMPLE: SAE J3194 associates this with a top speed in the range of 32 km/h to 48 km/h.
NOTE 1 to entry: Local regulations for the exact speed range vary.

Application Area: ITS Architecture
Strukturální kategorie: Data and Processes > Quantities

Filtering by Type

Filtering by Application Area