location information

identifier for a location

identifier for a location

location referencing

means to provide information that allows a system to accurately identify a location
NOTE 1 to entry: The content of a location reference allows the location to be presented in a graphical or textual manner to the end-user (e.g. coloured network graphs) as well as to be used for navigational systems purposes.

means to provide information that allows a system to accurately identify a location
NOTE 1 to entry: The content of a location reference allows the location to be presented in a graphical or textual manner to the end-user (e.g. coloured network graphs) as well as to be used for navigational systems purposes.

location referencing container (LRC; TPEG-LRC)

concept applied to the grouping of all the location referencing elements of a TPEG Message together in one place
NOTE 1 to entry: See ISO/TS 21219-7 for full details of the Location Referencing container.

concept applied to the grouping of all the location referencing elements of a TPEG Message together in one place
NOTE 1 to entry: See ISO/TS 21219-7 for full details of the Location Referencing container.

location table

agreed table which contains for each service information the area, road segment or point location where the source of the problem is situated
NOTE 1 to entry: Each location table is identified by three elements: a Number – Location Table Number, a Location Table Country Code, and a Location Table Extended Country Code. The combination of these three elements identifies a Location Table…

agreed table which contains for each service information the area, road segment or point location where the source of the problem is situated
NOTE 1 to entry: Each location table is identified by three elements: a Number – Location Table Number, a Location Table Country Code, and a Location Table Extended Country Code. The combination of these three elements identifies a Location Table uniquely. Each service has a Location Table defined by Location Table Number, a Location Table Country Code and Location Table Extended Country Code.

location table country code (LTCC)

assigns a code to each location table, based on the country of origin of the locations referenced in this table

assigns a code to each location table, based on the country of origin of the locations referenced in this table

location table extended country code (LTECC)

assigns a code to each location table, based on the country of origin of the locations referenced in this table
NOTE 1 to entry: Together the LTECC, LTCC and LTN identify a location database uniquely.

assigns a code to each location table, based on the country of origin of the locations referenced in this table
NOTE 1 to entry: Together the LTECC, LTCC and LTN identify a location database uniquely.

location table number (LTN)

number with the value 0 to 63 used to identify the Location Table used by the service provider
NOTE 1: The LTN is generally allocated to each service provider in a country by the relevant government or roads authority from a range assigned to that country. It is transmitted in type 3A groups.
NOTE 2: Value 0, when transmitted in type 3A groups, shows that the service provider is…

number with the value 0 to 63 used to identify the Location Table used by the service provider
NOTE 1: The LTN is generally allocated to each service provider in a country by the relevant government or roads authority from a range assigned to that country. It is transmitted in type 3A groups.
NOTE 2: Value 0, when transmitted in type 3A groups, shows that the service provider is encrypting the location codes.

location table number before encryption (LTNBE)

number with the value 1 to 63 used to identify the Location Table used by the service provider prior to the codes within the table being encrypted for transmission
NOTE: LTNBE is transmitted in type 8A groups.

number with the value 1 to 63 used to identify the Location Table used by the service provider prior to the codes within the table being encrypted for transmission
NOTE: LTNBE is transmitted in type 8A groups.

mapping information

is the information transmitted by the beacon which describes the network in the beacon region and allows the vehicle to track its position as it moves in the network

is the information transmitted by the beacon which describes the network in the beacon region and allows the vehicle to track its position as it moves in the network

measurement point

several traffic measurements (such as queuing time, number of stops etc.) are assigned to a measurement point; these measurements are taken between the last and the actual measurement point; at least a measurement point is defined at the end of each link by default, but it is possible to define additional measurement points at the end of the vectors the link is build with

several traffic measurements (such as queuing time, number of stops etc.) are assigned to a measurement point; these measurements are taken between the last and the actual measurement point; at least a measurement point is defined at the end of each link by default, but it is possible to define additional measurement points at the end of the vectors the link is build with

message

collection of coherent information sent through an information channel

collection of coherent information sent through an information channel

message expiry time (MET)

date and time in accordance with ISO 8601 when the message should be deleted from all TPEG-decoders
NOTE: Used for message management purposes.

date and time in accordance with ISO 8601 when the message should be deleted from all TPEG-decoders
NOTE: Used for message management purposes.

message generation time (MGT)

date and time stamp in accordance with ISO 8601 originated at the actual time and point of message generation
NOTE: Used for message management purposes.

date and time stamp in accordance with ISO 8601 originated at the actual time and point of message generation
NOTE: Used for message management purposes.

MGS

Message Geographical Scope

message management container (MMC)

concept applied to the grouping of all message elements, including Message Management Information, of a TPEG-Message together in one place

concept applied to the grouping of all message elements, including Message Management Information, of a TPEG-Message together in one place

message report type

element to signal the type of message for presentation purposes
NOTE: It may be an incident message report, station/terminal information, route information or individual service information, as defined in TPEG table pti27.

element to signal the type of message for presentation purposes
NOTE: It may be an incident message report, station/terminal information, route information or individual service information, as defined in TPEG table pti27.

mobile originated

monolithic message management

message management that allows versioning of messages by updating complete messages only

message management that allows versioning of messages by updating complete messages only

MMR

Multimodal Route

multipart message management

message management that allows parts of messages being transmitted in packets independently

message management that allows parts of messages being transmitted in packets independently

NIMA

National Imagery and Mapping Agency (US)

navigation app

mobility app that assists a transport user to determine the best route to a destination

mobility app that assists a transport user to determine the best route to a destination

network description

network description describes links in networks. It is an element of the additional location descriptions container

network description describes links in networks. It is an element of the additional location descriptions container

other network (ON)

notation appended in drawings, where necessary, to indicate that the code being transmitted [e.g. SID (ON)] relates not to the Tuned Service, but to a referenced Other Network
NOTE: Data about the Other Network(s) can be pre-stored in terminal equipment.

notation appended in drawings, where necessary, to indicate that the code being transmitted [e.g. SID (ON)] relates not to the Tuned Service, but to a referenced Other Network
NOTE: Data about the Other Network(s) can be pre-stored in terminal equipment.

parameter message

PKI

Parking Information Application

P2P

Peer-to-Peer (communication)

personal information device

personal system that enables personal access to traveller information
EXAMPLE: Personal computer.

personal system that enables personal access to traveller information
EXAMPLE: Personal computer.

pictogram category code

codes assigned to the more detailed category of a pictogram type under the service category

codes assigned to the more detailed category of a pictogram type under the service category

PIN code

numeric or alphanumeric code required to be entered into a terminal before that terminal is permitted to present decrypted RDS-TMC messages
NOTE: The value of the PIN code is calculated by the terminal manufacturer from an algorithm using terminal serial number and one or more application profiles as factors.

numeric or alphanumeric code required to be entered into a terminal before that terminal is permitted to present decrypted RDS-TMC messages
NOTE: The value of the PIN code is calculated by the terminal manufacturer from an algorithm using terminal serial number and one or more application profiles as factors.