availability period (AP)
defined period of time in which the system is available
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Terminology
calculation period (CP)
period over which the values are determined
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
clearance time
time between signal phases during which an intersection is not used by any traffic
NOTE 1 to entry: It is expressed in seconds.
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Terminology
data correctness (DC)
the probability of the data value being correct (within the bounds of any stated accuracy)
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
data latency (DL)
delay encountered between the capture of the incoming/live data and the output of the related occurrence/information to a data consumer
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
data update interval (UI)
interval of data update
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
data validity period (DV)
period after which the data objects can be considered to be no longer valid
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
maximum turn-around time
maximum amount of time a system is given to provide an appropriate response to the incoming data packet
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
Terminology
mean time between failures (MTBF)
mean cycle (one failure and one repair) time of a maintained system
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Terminology
mean time to repair (MTTR)
mean time to repair the service (MTTR) fault and bring the service back into operation
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
measurement source identity (MS)
the identity of the source of the raw, calculated or estimated data
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
response time-out period
maximum duration a system is required to wait for a response data packet prior to assuming that the previously sent data packet was never received by the other application
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
Terminology
saturation flow rate
equivalent hourly rate at which vehicles can traverse an intersection approach, assuming a constant
green indication at all time and no loss time
NOTE 1 to entry: It is expressed in vehicles per hour or vehicles per hour per lane.
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Terminology
turn-around time
period of time it takes a client or server to produce and transmit a response data packet, measured starting from the point at which the last byte of data is received from the other system to the point when the last response byte is transmitted
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
defined period of time in which the system is available
calculation period (CP)
period over which the values are determined
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
clearance time
time between signal phases during which an intersection is not used by any traffic
NOTE 1 to entry: It is expressed in seconds.
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Terminology
data correctness (DC)
the probability of the data value being correct (within the bounds of any stated accuracy)
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
data latency (DL)
delay encountered between the capture of the incoming/live data and the output of the related occurrence/information to a data consumer
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
data update interval (UI)
interval of data update
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
data validity period (DV)
period after which the data objects can be considered to be no longer valid
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
maximum turn-around time
maximum amount of time a system is given to provide an appropriate response to the incoming data packet
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
Terminology
mean time between failures (MTBF)
mean cycle (one failure and one repair) time of a maintained system
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Terminology
mean time to repair (MTTR)
mean time to repair the service (MTTR) fault and bring the service back into operation
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
measurement source identity (MS)
the identity of the source of the raw, calculated or estimated data
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
response time-out period
maximum duration a system is required to wait for a response data packet prior to assuming that the previously sent data packet was never received by the other application
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
Terminology
saturation flow rate
equivalent hourly rate at which vehicles can traverse an intersection approach, assuming a constant
green indication at all time and no loss time
NOTE 1 to entry: It is expressed in vehicles per hour or vehicles per hour per lane.
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Terminology
turn-around time
period of time it takes a client or server to produce and transmit a response data packet, measured starting from the point at which the last byte of data is received from the other system to the point when the last response byte is transmitted
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
period over which the values are determined
clearance time
time between signal phases during which an intersection is not used by any traffic
NOTE 1 to entry: It is expressed in seconds.
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Terminology
data correctness (DC)
the probability of the data value being correct (within the bounds of any stated accuracy)
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
data latency (DL)
delay encountered between the capture of the incoming/live data and the output of the related occurrence/information to a data consumer
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
data update interval (UI)
interval of data update
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
data validity period (DV)
period after which the data objects can be considered to be no longer valid
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
maximum turn-around time
maximum amount of time a system is given to provide an appropriate response to the incoming data packet
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
Terminology
mean time between failures (MTBF)
mean cycle (one failure and one repair) time of a maintained system
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Terminology
mean time to repair (MTTR)
mean time to repair the service (MTTR) fault and bring the service back into operation
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
measurement source identity (MS)
the identity of the source of the raw, calculated or estimated data
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
response time-out period
maximum duration a system is required to wait for a response data packet prior to assuming that the previously sent data packet was never received by the other application
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
Terminology
saturation flow rate
equivalent hourly rate at which vehicles can traverse an intersection approach, assuming a constant
green indication at all time and no loss time
NOTE 1 to entry: It is expressed in vehicles per hour or vehicles per hour per lane.
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Terminology
turn-around time
period of time it takes a client or server to produce and transmit a response data packet, measured starting from the point at which the last byte of data is received from the other system to the point when the last response byte is transmitted
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
time between signal phases during which an intersection is not used by any traffic
NOTE 1 to entry: It is expressed in seconds.
data correctness (DC)
the probability of the data value being correct (within the bounds of any stated accuracy)
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
data latency (DL)
delay encountered between the capture of the incoming/live data and the output of the related occurrence/information to a data consumer
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
data update interval (UI)
interval of data update
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
data validity period (DV)
period after which the data objects can be considered to be no longer valid
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
maximum turn-around time
maximum amount of time a system is given to provide an appropriate response to the incoming data packet
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
Terminology
mean time between failures (MTBF)
mean cycle (one failure and one repair) time of a maintained system
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Terminology
mean time to repair (MTTR)
mean time to repair the service (MTTR) fault and bring the service back into operation
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
measurement source identity (MS)
the identity of the source of the raw, calculated or estimated data
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
response time-out period
maximum duration a system is required to wait for a response data packet prior to assuming that the previously sent data packet was never received by the other application
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
Terminology
saturation flow rate
equivalent hourly rate at which vehicles can traverse an intersection approach, assuming a constant
green indication at all time and no loss time
NOTE 1 to entry: It is expressed in vehicles per hour or vehicles per hour per lane.
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Terminology
turn-around time
period of time it takes a client or server to produce and transmit a response data packet, measured starting from the point at which the last byte of data is received from the other system to the point when the last response byte is transmitted
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
the probability of the data value being correct (within the bounds of any stated accuracy)
data latency (DL)
delay encountered between the capture of the incoming/live data and the output of the related occurrence/information to a data consumer
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
data update interval (UI)
interval of data update
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
data validity period (DV)
period after which the data objects can be considered to be no longer valid
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
maximum turn-around time
maximum amount of time a system is given to provide an appropriate response to the incoming data packet
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
Terminology
mean time between failures (MTBF)
mean cycle (one failure and one repair) time of a maintained system
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Terminology
mean time to repair (MTTR)
mean time to repair the service (MTTR) fault and bring the service back into operation
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
measurement source identity (MS)
the identity of the source of the raw, calculated or estimated data
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
response time-out period
maximum duration a system is required to wait for a response data packet prior to assuming that the previously sent data packet was never received by the other application
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
Terminology
saturation flow rate
equivalent hourly rate at which vehicles can traverse an intersection approach, assuming a constant
green indication at all time and no loss time
NOTE 1 to entry: It is expressed in vehicles per hour or vehicles per hour per lane.
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Terminology
turn-around time
period of time it takes a client or server to produce and transmit a response data packet, measured starting from the point at which the last byte of data is received from the other system to the point when the last response byte is transmitted
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
delay encountered between the capture of the incoming/live data and the output of the related occurrence/information to a data consumer
data update interval (UI)
interval of data update
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
data validity period (DV)
period after which the data objects can be considered to be no longer valid
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
maximum turn-around time
maximum amount of time a system is given to provide an appropriate response to the incoming data packet
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
Terminology
mean time between failures (MTBF)
mean cycle (one failure and one repair) time of a maintained system
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Terminology
mean time to repair (MTTR)
mean time to repair the service (MTTR) fault and bring the service back into operation
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
measurement source identity (MS)
the identity of the source of the raw, calculated or estimated data
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
response time-out period
maximum duration a system is required to wait for a response data packet prior to assuming that the previously sent data packet was never received by the other application
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
Terminology
saturation flow rate
equivalent hourly rate at which vehicles can traverse an intersection approach, assuming a constant
green indication at all time and no loss time
NOTE 1 to entry: It is expressed in vehicles per hour or vehicles per hour per lane.
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Terminology
turn-around time
period of time it takes a client or server to produce and transmit a response data packet, measured starting from the point at which the last byte of data is received from the other system to the point when the last response byte is transmitted
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
interval of data update
data validity period (DV)
period after which the data objects can be considered to be no longer valid
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
maximum turn-around time
maximum amount of time a system is given to provide an appropriate response to the incoming data packet
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
Terminology
mean time between failures (MTBF)
mean cycle (one failure and one repair) time of a maintained system
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Terminology
mean time to repair (MTTR)
mean time to repair the service (MTTR) fault and bring the service back into operation
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
measurement source identity (MS)
the identity of the source of the raw, calculated or estimated data
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
response time-out period
maximum duration a system is required to wait for a response data packet prior to assuming that the previously sent data packet was never received by the other application
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
Terminology
saturation flow rate
equivalent hourly rate at which vehicles can traverse an intersection approach, assuming a constant
green indication at all time and no loss time
NOTE 1 to entry: It is expressed in vehicles per hour or vehicles per hour per lane.
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Terminology
turn-around time
period of time it takes a client or server to produce and transmit a response data packet, measured starting from the point at which the last byte of data is received from the other system to the point when the last response byte is transmitted
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
period after which the data objects can be considered to be no longer valid
maximum turn-around time
maximum amount of time a system is given to provide an appropriate response to the incoming data packet
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
Terminology
mean time between failures (MTBF)
mean cycle (one failure and one repair) time of a maintained system
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Terminology
mean time to repair (MTTR)
mean time to repair the service (MTTR) fault and bring the service back into operation
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
measurement source identity (MS)
the identity of the source of the raw, calculated or estimated data
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
response time-out period
maximum duration a system is required to wait for a response data packet prior to assuming that the previously sent data packet was never received by the other application
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
Terminology
saturation flow rate
equivalent hourly rate at which vehicles can traverse an intersection approach, assuming a constant
green indication at all time and no loss time
NOTE 1 to entry: It is expressed in vehicles per hour or vehicles per hour per lane.
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Terminology
turn-around time
period of time it takes a client or server to produce and transmit a response data packet, measured starting from the point at which the last byte of data is received from the other system to the point when the last response byte is transmitted
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
maximum amount of time a system is given to provide an appropriate response to the incoming data packet
mean time between failures (MTBF)
mean cycle (one failure and one repair) time of a maintained system
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Terminology
mean time to repair (MTTR)
mean time to repair the service (MTTR) fault and bring the service back into operation
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
measurement source identity (MS)
the identity of the source of the raw, calculated or estimated data
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
response time-out period
maximum duration a system is required to wait for a response data packet prior to assuming that the previously sent data packet was never received by the other application
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
Terminology
saturation flow rate
equivalent hourly rate at which vehicles can traverse an intersection approach, assuming a constant
green indication at all time and no loss time
NOTE 1 to entry: It is expressed in vehicles per hour or vehicles per hour per lane.
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Terminology
turn-around time
period of time it takes a client or server to produce and transmit a response data packet, measured starting from the point at which the last byte of data is received from the other system to the point when the last response byte is transmitted
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
mean cycle (one failure and one repair) time of a maintained system
mean time to repair (MTTR)
mean time to repair the service (MTTR) fault and bring the service back into operation
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
measurement source identity (MS)
the identity of the source of the raw, calculated or estimated data
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
response time-out period
maximum duration a system is required to wait for a response data packet prior to assuming that the previously sent data packet was never received by the other application
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
Terminology
saturation flow rate
equivalent hourly rate at which vehicles can traverse an intersection approach, assuming a constant
green indication at all time and no loss time
NOTE 1 to entry: It is expressed in vehicles per hour or vehicles per hour per lane.
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Terminology
turn-around time
period of time it takes a client or server to produce and transmit a response data packet, measured starting from the point at which the last byte of data is received from the other system to the point when the last response byte is transmitted
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
mean time to repair the service (MTTR) fault and bring the service back into operation
measurement source identity (MS)
the identity of the source of the raw, calculated or estimated data
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO TR 21707
Terminology
response time-out period
maximum duration a system is required to wait for a response data packet prior to assuming that the previously sent data packet was never received by the other application
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
Terminology
saturation flow rate
equivalent hourly rate at which vehicles can traverse an intersection approach, assuming a constant
green indication at all time and no loss time
NOTE 1 to entry: It is expressed in vehicles per hour or vehicles per hour per lane.
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Terminology
turn-around time
period of time it takes a client or server to produce and transmit a response data packet, measured starting from the point at which the last byte of data is received from the other system to the point when the last response byte is transmitted
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
the identity of the source of the raw, calculated or estimated data
response time-out period
maximum duration a system is required to wait for a response data packet prior to assuming that the previously sent data packet was never received by the other application
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
Terminology
saturation flow rate
equivalent hourly rate at which vehicles can traverse an intersection approach, assuming a constant
green indication at all time and no loss time
NOTE 1 to entry: It is expressed in vehicles per hour or vehicles per hour per lane.
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Terminology
turn-around time
period of time it takes a client or server to produce and transmit a response data packet, measured starting from the point at which the last byte of data is received from the other system to the point when the last response byte is transmitted
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
maximum duration a system is required to wait for a response data packet prior to assuming that the previously sent data packet was never received by the other application
saturation flow rate
equivalent hourly rate at which vehicles can traverse an intersection approach, assuming a constant
green indication at all time and no loss time
NOTE 1 to entry: It is expressed in vehicles per hour or vehicles per hour per lane.
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Terminology
turn-around time
period of time it takes a client or server to produce and transmit a response data packet, measured starting from the point at which the last byte of data is received from the other system to the point when the last response byte is transmitted
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
equivalent hourly rate at which vehicles can traverse an intersection approach, assuming a constant
green indication at all time and no loss time
NOTE 1 to entry: It is expressed in vehicles per hour or vehicles per hour per lane.
turn-around time
period of time it takes a client or server to produce and transmit a response data packet, measured starting from the point at which the last byte of data is received from the other system to the point when the last response byte is transmitted
Application Area:
Traffic Control Systems
Strukturální kategorie:
Data and Processes >
Quantities
Associated Standards:
ISO 14827-2
period of time it takes a client or server to produce and transmit a response data packet, measured starting from the point at which the last byte of data is received from the other system to the point when the last response byte is transmitted