zkušební zařízení
test equipment
entity used to verify that installation, uninstallation or modification of an application by an installer in OBE or WAE was performed successfully
NOTE: This entity may reside within the installer entity.
Aplikační oblast:
Komunikace (CALM)
Terminologie
zpracovaná data sondy
processed probe data
data from probe data messages which has been collated and analyzed in combination with other data
Aplikační oblast:
Komunikace (CALM)
Terminologie
zpracování dat sondy
probe processing
land-side activity which receives collected probe data from probe collection and processes it
NOTE: Probe processing does not receive any information from probe collection that identifies the vehicle or driver.
Aplikační oblast:
Komunikace (CALM)
Souvisící normy:
ISO 24100
Terminologie
zpráva o poskytovaných službách (SAM)
service advertisement message
fast message type for service advertisement message
Aplikační oblast:
Komunikace (CALM)
Terminologie
zpráva PDRM
probe data reporting management messages
a message containing of one or more PDRM instructions within a message structure
Aplikační oblast:
Komunikace (CALM)
Souvisící normy:
ISO TS 25114
Terminologie
zpráva požadavku preference; zpráva s požadavkem na signál (SRM)
signal request message
SAE J2735™ message from a C-ITS device to the infrastructure by which the vehicle asks for priority treatment by an intersection’s traffic signal controller
Aplikační oblast:
Komunikace (CALM)
Terminologie
zpráva sondy
probe message
structured collation of data elements suitable to be delivered to the onboard communication device for transmission to a land-based centre
NOTE: It is emphasized that a probe message should not contain any information that identifies the particular vehicle from which it originated or any of the vehicle’s occupants, directly or indirectly. In delivering a probe message to be transmitted by the onboard communication device, the onboard data collection system will request that the message be packaged and transmitted without any vehicle or occupant identifying information.
Aplikační oblast:
Komunikace (CALM)
Strukturální kategorie:
Data a procesy >
Datové modely, formáty a koncepty
Souvisící normy:
ISO 22837
Terminologie
zpráva sondy vyvolaná událostí
event based probe message
event based probe data includes event based probe data elements and event based probe messages
NOTE 1 to entry: An algorithm in the vehicle constantly processes sensor readings and determines if a specific event has occurred. An event based probe data message is sent only when a specific incident or event occurs. It is not transmitted in a periodic manner. The transmission of an event based probe message itself indicates that an event has occurred An event based probe message is defined as a probe message that is not triggered by a periodic occurring condition (i.e. time or distance). It is typically triggered after a defined event has occurred or an event has been detected by the vehicle on board system (i.e. low visibility or traffic jam entry). An event may be defined as simple as a change in status of a standard probe data element (i.e. fog light switching state) or can refer to a complex incident detected by a detection algorithm (i.e. traffic jam entry).
Aplikační oblast:
Komunikace (CALM)
Strukturální kategorie:
Data a procesy >
Datové modely, formáty a koncepty
Souvisící normy:
ISO 29284
test equipment
entity used to verify that installation, uninstallation or modification of an application by an installer in OBE or WAE was performed successfully
NOTE: This entity may reside within the installer entity.
zpracovaná data sondy
processed probe data
data from probe data messages which has been collated and analyzed in combination with other data
Aplikační oblast:
Komunikace (CALM)
Terminologie
zpracování dat sondy
probe processing
land-side activity which receives collected probe data from probe collection and processes it
NOTE: Probe processing does not receive any information from probe collection that identifies the vehicle or driver.
Aplikační oblast:
Komunikace (CALM)
Souvisící normy:
ISO 24100
Terminologie
zpráva o poskytovaných službách (SAM)
service advertisement message
fast message type for service advertisement message
Aplikační oblast:
Komunikace (CALM)
Terminologie
zpráva PDRM
probe data reporting management messages
a message containing of one or more PDRM instructions within a message structure
Aplikační oblast:
Komunikace (CALM)
Souvisící normy:
ISO TS 25114
Terminologie
zpráva požadavku preference; zpráva s požadavkem na signál (SRM)
signal request message
SAE J2735™ message from a C-ITS device to the infrastructure by which the vehicle asks for priority treatment by an intersection’s traffic signal controller
Aplikační oblast:
Komunikace (CALM)
Terminologie
zpráva sondy
probe message
structured collation of data elements suitable to be delivered to the onboard communication device for transmission to a land-based centre
NOTE: It is emphasized that a probe message should not contain any information that identifies the particular vehicle from which it originated or any of the vehicle’s occupants, directly or indirectly. In delivering a probe message to be transmitted by the onboard communication device, the onboard data collection system will request that the message be packaged and transmitted without any vehicle or occupant identifying information.
Aplikační oblast:
Komunikace (CALM)
Strukturální kategorie:
Data a procesy >
Datové modely, formáty a koncepty
Souvisící normy:
ISO 22837
Terminologie
zpráva sondy vyvolaná událostí
event based probe message
event based probe data includes event based probe data elements and event based probe messages
NOTE 1 to entry: An algorithm in the vehicle constantly processes sensor readings and determines if a specific event has occurred. An event based probe data message is sent only when a specific incident or event occurs. It is not transmitted in a periodic manner. The transmission of an event based probe message itself indicates that an event has occurred An event based probe message is defined as a probe message that is not triggered by a periodic occurring condition (i.e. time or distance). It is typically triggered after a defined event has occurred or an event has been detected by the vehicle on board system (i.e. low visibility or traffic jam entry). An event may be defined as simple as a change in status of a standard probe data element (i.e. fog light switching state) or can refer to a complex incident detected by a detection algorithm (i.e. traffic jam entry).
Aplikační oblast:
Komunikace (CALM)
Strukturální kategorie:
Data a procesy >
Datové modely, formáty a koncepty
Souvisící normy:
ISO 29284
processed probe data
data from probe data messages which has been collated and analyzed in combination with other data
zpracování dat sondy
probe processing
land-side activity which receives collected probe data from probe collection and processes it
NOTE: Probe processing does not receive any information from probe collection that identifies the vehicle or driver.
Aplikační oblast:
Komunikace (CALM)
Souvisící normy:
ISO 24100
Terminologie
zpráva o poskytovaných službách (SAM)
service advertisement message
fast message type for service advertisement message
Aplikační oblast:
Komunikace (CALM)
Terminologie
zpráva PDRM
probe data reporting management messages
a message containing of one or more PDRM instructions within a message structure
Aplikační oblast:
Komunikace (CALM)
Souvisící normy:
ISO TS 25114
Terminologie
zpráva požadavku preference; zpráva s požadavkem na signál (SRM)
signal request message
SAE J2735™ message from a C-ITS device to the infrastructure by which the vehicle asks for priority treatment by an intersection’s traffic signal controller
Aplikační oblast:
Komunikace (CALM)
Terminologie
zpráva sondy
probe message
structured collation of data elements suitable to be delivered to the onboard communication device for transmission to a land-based centre
NOTE: It is emphasized that a probe message should not contain any information that identifies the particular vehicle from which it originated or any of the vehicle’s occupants, directly or indirectly. In delivering a probe message to be transmitted by the onboard communication device, the onboard data collection system will request that the message be packaged and transmitted without any vehicle or occupant identifying information.
Aplikační oblast:
Komunikace (CALM)
Strukturální kategorie:
Data a procesy >
Datové modely, formáty a koncepty
Souvisící normy:
ISO 22837
Terminologie
zpráva sondy vyvolaná událostí
event based probe message
event based probe data includes event based probe data elements and event based probe messages
NOTE 1 to entry: An algorithm in the vehicle constantly processes sensor readings and determines if a specific event has occurred. An event based probe data message is sent only when a specific incident or event occurs. It is not transmitted in a periodic manner. The transmission of an event based probe message itself indicates that an event has occurred An event based probe message is defined as a probe message that is not triggered by a periodic occurring condition (i.e. time or distance). It is typically triggered after a defined event has occurred or an event has been detected by the vehicle on board system (i.e. low visibility or traffic jam entry). An event may be defined as simple as a change in status of a standard probe data element (i.e. fog light switching state) or can refer to a complex incident detected by a detection algorithm (i.e. traffic jam entry).
Aplikační oblast:
Komunikace (CALM)
Strukturální kategorie:
Data a procesy >
Datové modely, formáty a koncepty
Souvisící normy:
ISO 29284
probe processing
land-side activity which receives collected probe data from probe collection and processes it
NOTE: Probe processing does not receive any information from probe collection that identifies the vehicle or driver.
zpráva o poskytovaných službách (SAM)
service advertisement message
fast message type for service advertisement message
Aplikační oblast:
Komunikace (CALM)
Terminologie
zpráva PDRM
probe data reporting management messages
a message containing of one or more PDRM instructions within a message structure
Aplikační oblast:
Komunikace (CALM)
Souvisící normy:
ISO TS 25114
Terminologie
zpráva požadavku preference; zpráva s požadavkem na signál (SRM)
signal request message
SAE J2735™ message from a C-ITS device to the infrastructure by which the vehicle asks for priority treatment by an intersection’s traffic signal controller
Aplikační oblast:
Komunikace (CALM)
Terminologie
zpráva sondy
probe message
structured collation of data elements suitable to be delivered to the onboard communication device for transmission to a land-based centre
NOTE: It is emphasized that a probe message should not contain any information that identifies the particular vehicle from which it originated or any of the vehicle’s occupants, directly or indirectly. In delivering a probe message to be transmitted by the onboard communication device, the onboard data collection system will request that the message be packaged and transmitted without any vehicle or occupant identifying information.
Aplikační oblast:
Komunikace (CALM)
Strukturální kategorie:
Data a procesy >
Datové modely, formáty a koncepty
Souvisící normy:
ISO 22837
Terminologie
zpráva sondy vyvolaná událostí
event based probe message
event based probe data includes event based probe data elements and event based probe messages
NOTE 1 to entry: An algorithm in the vehicle constantly processes sensor readings and determines if a specific event has occurred. An event based probe data message is sent only when a specific incident or event occurs. It is not transmitted in a periodic manner. The transmission of an event based probe message itself indicates that an event has occurred An event based probe message is defined as a probe message that is not triggered by a periodic occurring condition (i.e. time or distance). It is typically triggered after a defined event has occurred or an event has been detected by the vehicle on board system (i.e. low visibility or traffic jam entry). An event may be defined as simple as a change in status of a standard probe data element (i.e. fog light switching state) or can refer to a complex incident detected by a detection algorithm (i.e. traffic jam entry).
Aplikační oblast:
Komunikace (CALM)
Strukturální kategorie:
Data a procesy >
Datové modely, formáty a koncepty
Souvisící normy:
ISO 29284
service advertisement message
fast message type for service advertisement message
zpráva PDRM
probe data reporting management messages
a message containing of one or more PDRM instructions within a message structure
Aplikační oblast:
Komunikace (CALM)
Souvisící normy:
ISO TS 25114
Terminologie
zpráva požadavku preference; zpráva s požadavkem na signál (SRM)
signal request message
SAE J2735™ message from a C-ITS device to the infrastructure by which the vehicle asks for priority treatment by an intersection’s traffic signal controller
Aplikační oblast:
Komunikace (CALM)
Terminologie
zpráva sondy
probe message
structured collation of data elements suitable to be delivered to the onboard communication device for transmission to a land-based centre
NOTE: It is emphasized that a probe message should not contain any information that identifies the particular vehicle from which it originated or any of the vehicle’s occupants, directly or indirectly. In delivering a probe message to be transmitted by the onboard communication device, the onboard data collection system will request that the message be packaged and transmitted without any vehicle or occupant identifying information.
Aplikační oblast:
Komunikace (CALM)
Strukturální kategorie:
Data a procesy >
Datové modely, formáty a koncepty
Souvisící normy:
ISO 22837
Terminologie
zpráva sondy vyvolaná událostí
event based probe message
event based probe data includes event based probe data elements and event based probe messages
NOTE 1 to entry: An algorithm in the vehicle constantly processes sensor readings and determines if a specific event has occurred. An event based probe data message is sent only when a specific incident or event occurs. It is not transmitted in a periodic manner. The transmission of an event based probe message itself indicates that an event has occurred An event based probe message is defined as a probe message that is not triggered by a periodic occurring condition (i.e. time or distance). It is typically triggered after a defined event has occurred or an event has been detected by the vehicle on board system (i.e. low visibility or traffic jam entry). An event may be defined as simple as a change in status of a standard probe data element (i.e. fog light switching state) or can refer to a complex incident detected by a detection algorithm (i.e. traffic jam entry).
Aplikační oblast:
Komunikace (CALM)
Strukturální kategorie:
Data a procesy >
Datové modely, formáty a koncepty
Souvisící normy:
ISO 29284
probe data reporting management messages
a message containing of one or more PDRM instructions within a message structure
zpráva požadavku preference; zpráva s požadavkem na signál (SRM)
signal request message
SAE J2735™ message from a C-ITS device to the infrastructure by which the vehicle asks for priority treatment by an intersection’s traffic signal controller
Aplikační oblast:
Komunikace (CALM)
Terminologie
zpráva sondy
probe message
structured collation of data elements suitable to be delivered to the onboard communication device for transmission to a land-based centre
NOTE: It is emphasized that a probe message should not contain any information that identifies the particular vehicle from which it originated or any of the vehicle’s occupants, directly or indirectly. In delivering a probe message to be transmitted by the onboard communication device, the onboard data collection system will request that the message be packaged and transmitted without any vehicle or occupant identifying information.
Aplikační oblast:
Komunikace (CALM)
Strukturální kategorie:
Data a procesy >
Datové modely, formáty a koncepty
Souvisící normy:
ISO 22837
Terminologie
zpráva sondy vyvolaná událostí
event based probe message
event based probe data includes event based probe data elements and event based probe messages
NOTE 1 to entry: An algorithm in the vehicle constantly processes sensor readings and determines if a specific event has occurred. An event based probe data message is sent only when a specific incident or event occurs. It is not transmitted in a periodic manner. The transmission of an event based probe message itself indicates that an event has occurred An event based probe message is defined as a probe message that is not triggered by a periodic occurring condition (i.e. time or distance). It is typically triggered after a defined event has occurred or an event has been detected by the vehicle on board system (i.e. low visibility or traffic jam entry). An event may be defined as simple as a change in status of a standard probe data element (i.e. fog light switching state) or can refer to a complex incident detected by a detection algorithm (i.e. traffic jam entry).
Aplikační oblast:
Komunikace (CALM)
Strukturální kategorie:
Data a procesy >
Datové modely, formáty a koncepty
Souvisící normy:
ISO 29284
signal request message
SAE J2735™ message from a C-ITS device to the infrastructure by which the vehicle asks for priority treatment by an intersection’s traffic signal controller
zpráva sondy
probe message
structured collation of data elements suitable to be delivered to the onboard communication device for transmission to a land-based centre
NOTE: It is emphasized that a probe message should not contain any information that identifies the particular vehicle from which it originated or any of the vehicle’s occupants, directly or indirectly. In delivering a probe message to be transmitted by the onboard communication device, the onboard data collection system will request that the message be packaged and transmitted without any vehicle or occupant identifying information.
Aplikační oblast:
Komunikace (CALM)
Strukturální kategorie:
Data a procesy >
Datové modely, formáty a koncepty
Souvisící normy:
ISO 22837
Terminologie
zpráva sondy vyvolaná událostí
event based probe message
event based probe data includes event based probe data elements and event based probe messages
NOTE 1 to entry: An algorithm in the vehicle constantly processes sensor readings and determines if a specific event has occurred. An event based probe data message is sent only when a specific incident or event occurs. It is not transmitted in a periodic manner. The transmission of an event based probe message itself indicates that an event has occurred An event based probe message is defined as a probe message that is not triggered by a periodic occurring condition (i.e. time or distance). It is typically triggered after a defined event has occurred or an event has been detected by the vehicle on board system (i.e. low visibility or traffic jam entry). An event may be defined as simple as a change in status of a standard probe data element (i.e. fog light switching state) or can refer to a complex incident detected by a detection algorithm (i.e. traffic jam entry).
Aplikační oblast:
Komunikace (CALM)
Strukturální kategorie:
Data a procesy >
Datové modely, formáty a koncepty
Souvisící normy:
ISO 29284
probe message
structured collation of data elements suitable to be delivered to the onboard communication device for transmission to a land-based centre
NOTE: It is emphasized that a probe message should not contain any information that identifies the particular vehicle from which it originated or any of the vehicle’s occupants, directly or indirectly. In delivering a probe message to be transmitted by the onboard communication device, the onboard data collection system will request that the message be packaged and transmitted without any vehicle or occupant identifying information.
zpráva sondy vyvolaná událostí
event based probe message
event based probe data includes event based probe data elements and event based probe messages
NOTE 1 to entry: An algorithm in the vehicle constantly processes sensor readings and determines if a specific event has occurred. An event based probe data message is sent only when a specific incident or event occurs. It is not transmitted in a periodic manner. The transmission of an event based probe message itself indicates that an event has occurred An event based probe message is defined as a probe message that is not triggered by a periodic occurring condition (i.e. time or distance). It is typically triggered after a defined event has occurred or an event has been detected by the vehicle on board system (i.e. low visibility or traffic jam entry). An event may be defined as simple as a change in status of a standard probe data element (i.e. fog light switching state) or can refer to a complex incident detected by a detection algorithm (i.e. traffic jam entry).
Aplikační oblast:
Komunikace (CALM)
Strukturální kategorie:
Data a procesy >
Datové modely, formáty a koncepty
Souvisící normy:
ISO 29284
event based probe message
event based probe data includes event based probe data elements and event based probe messages
NOTE 1 to entry: An algorithm in the vehicle constantly processes sensor readings and determines if a specific event has occurred. An event based probe data message is sent only when a specific incident or event occurs. It is not transmitted in a periodic manner. The transmission of an event based probe message itself indicates that an event has occurred An event based probe message is defined as a probe message that is not triggered by a periodic occurring condition (i.e. time or distance). It is typically triggered after a defined event has occurred or an event has been detected by the vehicle on board system (i.e. low visibility or traffic jam entry). An event may be defined as simple as a change in status of a standard probe data element (i.e. fog light switching state) or can refer to a complex incident detected by a detection algorithm (i.e. traffic jam entry).